... engine core of Capelec, France, the HC, CO and CO2 in the exhaust gas of gasoline vehicle were measured by the principle of infrared absorption spectrophotometry. The concentration of O2 and NO was measured by electrochemical principle. It is suitable for

Biogas Analyzer OVERVIEW Handheld Biogas Analyzer is designed to measure CH4, CO2, O2, H2S standard gases and optional H2, CO gases, even biogas flow monitoring. This model is powered by lithium battery and can be used without AC power. It is modular ...

CO2 Detector CO2 SENSOR LCD Monitor Gas Detector Carbon Dioxide Tester PM2.5 PM10 Multifunctional Air Quality Detector Monitor Product Description Multifunction carbon dioxide monitor, provide high accuracy and high stable real time CO2 concentration data, and also display temperature, humidity, dew TEMPM, Wet Bulb TEMPM, and current time and data. 80000 groups history logging function allow you to do detail analyse...

... Transmission OVERVIEW Kane AUTOplus 5-2 Exhaust Gas Analyser measures five gases Carbon Monoxide, Carbon Dioxide, Hydrocarbons, Oxygen, NOx and Lambda. Portable and lightweight the handset can be held with one hand and ...

Online Automobile Emission Gas Analyzer OVERVIEW Gasboard-5100 series automobile emission gas analyzers adopts independent intellectual property rights ultraviolet absorption spectrum gas analysis technology to measure NO and NO2 concentration. Adopts NDIR...

PA200 Series Intelligent Gas Analyzer Introduces ABB advanced technology for manufacturing. Analysis principle of infrared, magneto mechanical oxygen, thermal conductivity, trace oxygen, trace water and solid oxygen. A double-layer four-chamber receiver...

Specifications Model: SV-YQ Introduced: 【Features】 Measure the exhaust emissions of petrol vehicles and diesel vehicle emissions components of smoke, no other equipment, simple and powerful. 【Main Technical Parameters】 Measuring range CO: 0 ~ 10% CO2: 0 ~ ...

...Gas Analyzer 1. SV-5Q Portable Automobile Multi Exhaust Gas Analyzer is a new multi 5 gas analyzer which developed from four gas analyser, it equipped with large-screen LCD display English menu; 2. Used to measure vehicle engine flue exhaust gas CO, HC, CO2...

Product Description Hospital Medical Portable Handheld Etco2 Anesthesia Multi gas Analyzer Monitoring CO2, N2O, ISO, ENF, SEV... Product name Multigas analyser Model UN1000 Features: 1. 5'' TFT display with 480*272 resolution; 2. Bullt-in holder multi ...

...CO2 Gas Detector, CO2/Temp. Meter, portable single gas detector, handheld gas analyser, co2 gas flow meter portable CO2 Gas Detector, CO2/Temp. Meter, portable single gas detector, handheld gas analyser, co2 gas flow meter Model: AZ7752 Product Name:AZ7752 CO2/Temp. Meter Features: LOW COST PORTABLE METER CHECKING POOR INDOOR AIR QUALITY IN OFFICE DUAL DISPLAY 2 PARAMETERS SIMULATNEOUSLY:CO2...

Gas Permeation Tester Function and usage Gas permeation tester tests the gas transmission rate(GTR) of packaging material. This instrument is widely used in food industry,pharmaceuticalindustry, cosmetics flexible packaging materials industry(plastic film...

... supplied 4.Ideal for emissions diagnostics, tuning and regulated testing 5.Measures CO, HC, O2, CO2, NOx and Lambda (or AFR) 6.Fast warm up time and fast response time with higher output pump 7.RPM and oil temperature ...

... with user-selectable gas mixtures Battery Life Up to 8 hours Data Output Excel compatible data via USB memory stick Printer Thermal printer: ...

Price: 1,738.40 Availability: 7 days Model: 25171 Manufacturer: KIMO INSTRUMENTS Average Rating: Not Rated QtyAdd to Cart

PA200 Series Intelligent Gas Analyzer Introduces ABB advanced technology for manufacturing. Analysis principle of infrared, magneto mechanical oxygen, thermal conductivity, trace oxygen, trace water and solid oxygen. A double-layer four-chamber receiver...

... with user-selectable gas mixtures Battery Life Up to 8 hours Data Output Excel compatible data via USB memory stick Printer Thermal printer: ...

...CO2-CO Analyser Details Rapidox 3100EAB Bench mounted O2-CO2-CO Analyser Description The Rapidox 3100EAB is a three-gas analyser for measuring O2-CO2- CO together at the same time. The analyser allows accurate analysis over the oxygen range 0 to 100% O2 with a resolution of 0.01%, and CO2 and CO ranges selectable at time of purchase. The Rapidox 3100EAB analyser provides continuous on-line gas analysis, with a typical response time of less than 20 seconds for a 90% response to a step change in oxygen compositions and approximately 30 seconds for a 90% step change in CO2 and CO. The analyser contains a powerful Nitto motor-driven diaphragm vacuum pump which draws a gas sample at a rate that can be set by the user. The flow of gas can be adjusted using the flow gauge/needle valve on the front panel of the analyser. Typical flow rate is 1 litre per minute. Alternatively the pump can be independently switched off and operated under flowing gas conditions. An internal pressure sensor compensates for small changes in gas pressure to maintain the accuracy of readings. The oxygen sensor is a Yuasa electrochemical O2 sensor, which has a five year life expectancy and can be used in a wide range of gases such as nitrogen, argon, helium and carbon dioxide. The sensor is not affected by the presence of hydrocarbons. The CO2 and CO sensors are based on infra-red cell technology which gives extremely stable and accurate readings over a period of many years. The cells have a life-expectancy in excess of ten years and are supplied fully calibrated. The analyser is also packed with features including programmable alarm circuits, programmable analogue outputs, easy calibration (user selectable gases), RS232 communications and complete communications / data logging software. Features Bench mounted gas sampling O2-CO2-CO gas analyser Continuous gas sampling via powerful yet quiet internally located motor driven pump Flow rate controlled by needle valve / flow gauge on front panel Fast measurement response (typically less than 30 seconds for a 90% change in composition) Wide range of measurement options available Accuracy1% of the full scale with a precision of0.5% for oxygen measurements and +/- 2% full scale accuracy for CO2 and CO measurements. Oxygen sensor life expectancy typically 3-5 years. Ten years for CO2 and CO RS232, RS485, 0-5V or 4-20mA current loop outputs (both fully programmable) Printer and transport Peli-case options Fully programmable alarms with outputs and visual / audible warning Easy calibration procedure requiring any two gas mixtures (ordinary room air is usually one) PIN code protected menu access Large back-lit LCD display showing O2-CO2-CO (in % or ppm) plus data / time / pressure Applications Biomedical research using anaerobic atmospheres Research and development applications with CO, CO2 and O2 measurement requirements Cooled flue gas measurements, dependent on clean sample gas stream (filters can be supplied) Food production including MAP packing of fresh meat under inert gases Gas purity testing, single analyser allows multiple gas mixtures to be tested Glove box applications Concrete production processes where CO, CO2 and O2 monitoring are paramount to success Technical Data: Analyser Technical Data: Sensors and Pump Voltage 90-260Vac, 50/60Hz O2 Sensor Electrochemical cell 0-100% range ±1% of Full Scale Analyser dimensions 350mm x 263mm x 150mm CO2 sensor Infra-red dual phase card (range selectable at time of order) ±2% of FS accuracy Weight 5.5 kg CO sensor Infra-red dual phase card (range selectable at time of order) ±2% of FS accuracy Display 20 x 4 character (9mm) back lit LCD Life expectancy 3-5 years O2, CO & CO2 up to ten years Warm up time 3-4 minutes at 20°C Response time (@ gas...

... 16 x 2 character (9mm) back lit LCD Life expectancy O2 3-5 years Warm up time 3-4 minutes at 20°C Life expectancy CO2 >10 years Operating temperature