Detailed Description
key programmer OBD 2 for toyota
Features Specifications: C Smart key maker for TOYOTA, key
programmer OBD 2
Toyota Smart Keymaker OBD(Support Toyota Lexus Smart Key)
Safe and efficient: Only need 20 seconds to add one key
It is safe for the security alarm system
Support all kinds of Toyota and Lexus smart key system: support K
line and CAN-BUS protocols
It is the most safe and fast key programmer device for Toyota and
Lexus series till now.
It supports all key lost
Use the main key to add the other keys:
Connect the programmer to the OBD port of the car, there are some
short beep sounds after power on, it enters auto search car status.
Press the start button twice to wake up the anti-theft module. When
the connection with the module is done successfully after 7
seconds, there is a long beep 4-5 sounds (4 sounds means the system
is IV K system, 5 sounds means V CANBUS system). Wait 30 seconds,
there are a long beep sounds, it means the car enter into add key
state.
Add smart key: put the original car key (with the logo side) access
to the start button, you should hear two beep sounds. SEC light
will flash twice; within 5 seconds, put the key close to the start
button, you should hear 2 beep sound, SEC light will flash twice;
after learn all the smart key, wait 30 seconds till SEC light begin
flash, and the car will close adaptation mode automatically.
All the key was lost or only have vice key, need to do
initialization:
Press constantly the LED button, and plug into the OBD port of the
car, after two short beep sounds, finish press, it enters into auto
search car status.
Press the start button twice, in order to wake the anti-theft
computer. When the connection with the Computer of car is done
successfully after 7 seconds, there is a long beep 4-5 sound (4
sounds mean the system is IV K system, 5 sounds mean V CANBUS
system), 5 seconds later, LED light go out. Wait 10-16
minutes,there are a long beep sounds, and LED light flicker, it
means the car enter into study key state.
All keys lost matching mode: Add every smart key which need to
program(with the logo side)access to the start button, meanwhile
you will here two beep sound. SEC light will shine twice; After you
finisher studying all the smart keys, wait 30 seconds till SEC
light shining, the system will Auto-close study state
Notice:
1. Must use the right new smart
keymaker, and follow the right step above, otherwise you take the
consequences.
2. If the device can't match
the key, and LED light shining constantly, pls clear the error code
by using anti-theft system such as T300.
3. After finishing program
keys, the key can strat but the SEC light is still turn on, maybe
you use the vice key, only main key can manually shut the study
mode.
4. Dont try to open the cover
of programmer and dash board, otherwise you take the consequences.
5. This machine is only
provided for the legal auto repair. Otherwise you will take the
above consequences. |
