The Introduction of fully automatic and continuous running
1. Brief introduction
This pyrolysis production line is applied to process the tire
scraps into liquid fuel oil, which achieves the high efficiency
continuous production with great safety, zero environment
performance, good society effect result and economic benefit
The whole production line mainly includes: tire pretreatment
system, constant temp heating system, continuous running pyrolysis
system, closed-type carbon char discharging system, emission
controlling system etc.
2. Equipments advantage
1) The most advanced constant tem heating system, realizing to heat
and be heated under dynamic condition, the feedstock will be heated
well with available to adjust and control the pyrolysis temp,
meanwhile, it can also store the thermal energy and recycle to use
the heat with high efficiency and saving energy.
2) The advanced low temperature catalytic cracking technology with
low temp sulfur transfer catalyst, the feedstock will be
pyrolysized completely under low temperature. The oil output is
very high with 45-50%, the low yield of flammable gas with 2-4%,
the oil quality is better. The carbon black quality is good with
the low pyrolysis temp and without the coking in the reactor.
3) The equipment’s service life is longer than traditional products
because of the low pyrolysis temperature during production.
4) Automatic and continuous running production with steadily and
5) The flammable gas will be recycled to use for heating and save
6) The PLC control system controls the reactor inner pressure
50-10pa during running time, which makes sure this line’s
seal-ability and use the PLE intelligent controlling that includes
feeding, discharging, rotation speed etc.
7) Heating and being heated is accurate (the deviation of temp is
1℃ ), at the same time, it can also store some heat during heating
time, making the thermal efficiency is best and saving the energy.
8) The waste gas or emission controlling system, it is available to
adjust and control the temp and air quantity. The adsorption
catalyst in the gas purifier and has strong adsorption ability,
high adsorption speed, quick desorption speed, easily renew, which
can remove the gas like: H2S、CL2、CO、CO2、SO2、SO3、NOX、CS2、NH3, oil gas and other organic compounds and solid particles, the
emission can meet the developed countries standard. The fully
automatic and continuous pyrolysis production line is popular in
many industries and the equipment’s comprehensive performance is
the most advanced at home and abroad.
9) The cost is lowest in the world and economic efficiency is
highest in the pyrolysis technology.
3. Parameters of the equipments
1) Processing capacity: 15-30tons per day
2)Equipment covering area: 55 x 25 m
5)Source power：three phase and four wires, 380v
6)Working pressure: micro negative pressure