Strong Carrying Capacity of Vertical Bucket Elevator/Belt Type
Belt type bucket elevator use belt as dragging device, it mainly use for conveying material
with bulk densityρ＜1.5t/m³in vertical direction, which can be
powdery material, particles, small lump, less abrasive material.
Use normal belt, the temperature of conveying material should not
exceed 60℃, Use wire belt, conveying material temperature can reach
80℃,use heat resistant belt, material temperature not exceed 150℃,
elevating height is 4～30m.Normal model of TD type bucket elevator
is TD160,TD250,TD315,TD400 etc. conveying capacity is 3.1～66m³/h.
It is widely use in chemical engineering, metallurgy, construction
material, food, mining industries etc.
Vertical Bucket Elevator Application:
Bucket elevator is designed for vertical transportation powder,
granular materials and small block and grinding of small materials,
such as: coal, cement, stones, sand, clay, ore and so on. Or other
industries of dry mortar for construction, chemistry and foodstuff.
Structure OF Belt Type Bucket Elevator:
Belt bucket elevator is consist of driving device, top section,
bucket, rubber belt, middle cover, middle cover with manhole,
bottom section. The features are
1 Using rubber belt as drag device, it has features such as small
dead load, flexible, stable operation etc.
2 The middle cover of equipment is welded by bending parts, which
make each section of cover have commonality and interchangeability,
it ensure cover has good verticality after assembly.
3 Cover and head cover has several access doors, it is easy to
check and replace spare parts once fault happens or change wearing
4 Between covers and access door to cover have seal, which ensure
no dust escape. Clean and environmental protection.
5 Set reverse stop device, which can preventing accident cause by
power off and other problem.
6 Feeding inlet have high position and low position, high position
has angle 60° with horizontal, which is used for elevating wet and
powdery material. Low position has angle 45° with horizontal, which
is used for elevating dry and good scattering material.
Our Advantages of Bucket elevator:
1. Widely usage, it can elevate powdery material, particles, small
2. Flexible to select mixing or centrifugal discharge method
according to material properties.
3. Good sealing, no dust escape. Clean and environmental
4. Using rubber belt with small dead load, flexible, stable
operation, thus elevating speed and process efficiency is higher.
Bucket elevator Specifications:
|Capacity(m³/h)||Deep Bucket||Light Bucket||Deep Bucket||Light Bucket||Deep Bucket||Light Bucket||Deep Bucket||Light Bucket|
|Hopper||Bucket Type||Deep Bucket||Light Bucket||Deep Bucket||Light Bucket||Deep Bucket||Light Bucket||Deep Bucket||Light Bucket||Deep Bucket|
|Ring Chain||Pitch Qty||7||7||9||9||7|
|Bucket movement speed (m/s)||1.0||1.25||1.25||1.25||1.37|
|Drive Shaft Speed ( rpm)||47.5||47.5||37.5||37.5|