Plastic Water Bottle Making Machine for Small Plastic / Juice
Performance and Characteristics:
1. The built-in continuous rotating infeed system effectively
reduces the space occupied. The consistency of preform position
2. 48mm pitched, more preforms are uninterruptedly heated within
the same distance, which improves the efficiency and energy saving
saving can be up to 40%).
3. The thermostatic heating system ensure that the heating
temperature of each preform surface and internal is uniform.Hinged
make it easy for the operators to change infrared tubes and do
4. The perform transfer system with grippers and the variable pitch
system are both driven by the servo motors to ensure high speed and
accurate preform handling between the two mechanism.
5. The Servo driven the molding mechanism, triggering off the
linkage to the bottom mold. The application of high speed precision
unit helps to make high capacity.
6. The cooling system for the preform neck is equipped to ensure
the preform neck does not deform during heating and blowing.
7. The high pressure blowing system is equipped with the air
recycling device which may reduce the air consumption to achieve
efficient and environmental safe.
8. Being highly intelligent, the machine is equipped with the units
of preform temperature detection, leaking bottle detection and
well as jammed air conveyor detection, ect, which ensures the
machine work efficiently and stably.
9. Operation on the touch screen is simple and easy.
10. This series is applied in making PET bottle for drinking water,
beverages,liquid milk drinks……ect.
|Molding Spec.||Preform Pitch||mm||108|
|Preform Heating Pitch||mm||48|
|Container Spec.||Max.Container Volume||L||1.5|
|Neck Diameter Range||mm||38|
|Power Spec.||Rated Power||KW||94|
|Compressor Spec.||Blowing Pressure||Mpa||2.8~3.2|
|Main Machine Spec.||Size||mm||5809*3019*2784|
Note:*Due to continuous technical development specification would
be improved without prior notice.
*Special designs correspond to customers needs.