Vag Dash Com Version: 1.65
VAG Dash Can Version: 5.17
This item can read audi pin code .but not support AUDI A4
Descriptions for VAG Dash COM:
VAG dash COM is the unique advanced diagnostic tool to read out the
internal memory of your
Instrument cluster, is a kind of VAG Diagnostic Tool. This item can
read audi pin code .but not support
You can display the login code, recalibrate the odometer and
rewrite the EEprom data in case of
changing an instrument.
VAG dash COM covers up the models 1998-2004 such as:
Audi A3 / A2 / A6
Audi A4 till 2000
All those models with communication via K-line
Additional items you'll need to use this tool.
Host: based or Pentium PC with a free Com1-8 port or USB port
This high-performance tool covers up the new generation of
instrument clusters from 2002.
VAGdashCAN V5.17 can work for GolfV,Touran, Passat B6, Jetta, the
new Seat models, such as Altea II and the new Skodas.
recalibrate or correct the odometer
add keys to the car even though you don’t have all existing keys
do key adaptation without 5 minutes delay on new keys
read out the login / secret key code (SKC)
and more .....
VW / SEAT / SKODA
Please press this button in order to read out the VDO instrument
clusters of the last generation.
An example is the Golf Mark V from 2003 up to 06.2006.
Some SEAT and SKODA models are equipped with clusters of that type
until MY 2009.
Please press this button in order to read out Passat B6.
In those cars you cannot get immobiliser information from the
instrument clusters, since the immobiliser unit is part of the convenience module.
Please press this button in order to read out AUDI A3 instrument
clusters of the brand VDO.
Please press this button in order to read out AUDI A4 instrument
clusters BOSCH RB4.
Please press this button in order to read out Phaeton and Touareg
instrument clusters BOSCH RB4.
Diesel Control units are very often used since 1999. Those units
cover up most of the diesel vehicles at VAG.
SEAT and SKODA equipped their cars some years longer with ecu´s of
Those Diesel Control units are built into cars since 2002. They are
the most frequently use ECUs in
Diesel Cars of the latest generation.
ME7.* /MED 9.5
The engine ecu type BOSCH ME7.* was used in petrol cars such as
Golf IV or Audi TT. You can read out following types of ecu´s: ME7.5, ME7.1, ME7.5.1, ME7.1.1.
The ecu ME7.1.1 of the Golf V is not implemented yet.
When you click on this button, you reach the EEprom adaption
channels of the BOSCH ME7.* engine
Those are for example the SEL scaling and the idle speed offset.
When you click on this button you can read out the login code from
the single standing Immobiliser
units. Whit boxes from Audi A4 with 12pin connector and boxes from
LT. As well you can read out boxes from 1994-1998, but only when an adapted key is inserted into the
Q: How to install the software? What i have to pay attention to?
A: You must use windows XP system computer,32bit. Please close
anti-virus software before installation.
Q: What i have to pay attention when use this tool?
A: Please install software first then connect device.
Q: What i should do when encounter install problem?
A: Please change a computer for try first. If do have
problem,please contact customer service.
Web: www.bowshine.com / www.uobd2shine.com