ZSY hardened tooth surface series cylindrical gear reducer
Specifications
1.Long work life 2.Running Smoothly
3.Low nosie
4.High efficiency
5.Ten years manufacturing experience
Stage | Model | Ratio | Nominal Power (KW) | Nominal Torque(N.m) | Shaft |
Single-stage | 80--560 | 1.25--5.6 | 350-4,793 | 357-154,550 | Solid Shaft |
Double-stage | 112--710 | 6.3--20 | 6.8-6,229 | 1,162-426,541 |
Three-Stage | 160--710 | 22.4--100 | 4-1,905 | 4,075-519,520 |
Four-Stage | 180--800 | 100--500 | 1.5-1,100 | |
ZSY hardened tooth surface series cylindrical gear reducer
overview:
Hardened reducer is widely used in metallurgy, mining, lifting,
transportation, cement, construction, chemical, textile, printing
and dyeing.
Field Hardened reducer, pharmaceutical etc.. Hardened reducer, a
power transmission mechanism, the gear speed converter, motor
rotating number reduction to rotation number, and obtain larger
torque device. Hardened reducer is a relatively sophisticated
machinery, use it for the purpose of increasing the torque, reduce
speed, suitable for high speed shaft speed of not more than 1500
rpm, gear circumferential speed of not more than 20 m / s, the
environmental working environment temperature is -40 °C - 45 °C.
ZSY hardened tooth surface series cylindrical gear reducer
features:
Hardened reducer gear with high strength low carbon alloy steel
after carburizing and quenching into high gear, tooth surface
hardness, CNC grinding technology, high precision, good contact,
high transmission efficiency, stable operation, low noise; small
volume, light weight, long service life, high bearing capacity;
easy to remove inspection, easy to install.
1, center distance, center height, drive number priority than using
priority number system.
2, the gear parameters, structure optimization design by computer.
3, gear made of high strength low carbon alloy steel after
carburizing and quenching gear grinding. Tooth surface hardness is
high, the precision of gear up to international standard class 6.
4, high transmission efficiency, low noise.
ZSY hardened tooth surface series cylindrical gear reducer Scope of
application:
1, high-speed shaft speed is not greater than 1500 to / min;
2, gear circumferential speed of not more than 20 m / s.;
3, working environment temperature is -40 °C - 45 °C, if less than
0 °C, before the start of the lubricating oil should be preheated
to 0 °C.