UV Laser Type For High Precision Application For Electrical Plastic
UV laser marking machine belongs to the laser marking machine
series products, use 355 nm ultraviolet laser research and
development, and it USES of third-order intracavity frequency
doubling technique compared to the infrared laser, minimal focal sp
355 uv light, can largely reduce the material and processing of
mechanical deformation heat effect is small.
Mainly be used for super fine marking, engraving, especially
suitable for used in food, medicine packaging material marking,
microporous, glass material of high speed divided and complex
graphics on silicon wafer cutting and application field.
1. Product Introduction
Two laser heads to mark on both sides of PCB, load and unload the
plate with vacuum sucker in two feeding line.
CT:500mm×500mm PCB, marking on both side, 2 marks on each side,4
seconds per PCB.
2. Technical Feature
Two workplaces switching mode,and to mark on both sides at same
time with two laser heads.
Vacuum sucker does no demage to PCB plate.
Device size: 2300mm*1900mm*1600mm.
Laser repetitive frequency
Q switch laser pulse width
110*110 mm /175*175mm /300*300mm
1. Good beam quality, smaller focus spot, can reach ultra precise
2. Most materials can absorb UV laser, so that it has a wider range
of application, sufficient to processing capacity of infrared
3. Minimal heat-affected zone, no thermal effect, no material
4. high marking speed and effect.
5. The machine performance is stability, small size and low power
Since UV laser beam spot is extremely small, and the processing is
minimal heat-affected zone, which can be ultra-fine marking,
special materials marking, the first choice of customers to marking
effect. UV laser no thermal effect, the result of marking and
cutting precision, smooth, steep side walls, does not produce
thermal effects, no burning problem, in addition to copper, a lot
of material is absorbing 355nm UV light, so UV laser fits most
1. Medicine, such as pharmaceutical paper boxes, pharmaceutical
2. Cosmetics industry, such as paper boxes, glass boxes, plastic
boxes and so on
3. Apply to the tobacco line, such as each set cigarette to be
marked on the area code
4. Food and beverage packaging,Wine gift box,Chemical products
6. Clothing accessories,Manufacturers LOGO logo text information
7. Electronic components, such as the capacitor on the standard
8. Building materials on the label PVC water pipes
Q1: I know nothing about the fiber laser marking machine, what kind of
machine I should choose?Very easy to choose.
Just tell us what you want to do using this machine. And sending us
a sample picture is better.
Then we will send you a perfect solutions and suggestions.
Q2: When I get this machine, but I don’t know how to use it. What
should i do?
We will send you the English manual and CD video for machine using
and maintaining with
machine. If you still have some doubts, we can talk by telephone or
skype. Our engineer can
also be sent to your country to install or adjust machine if
Q3:if some problems happened to this machine during warranty
period, what should i do?
We will supply free parts for this machine during the warranty
period if machine have any
problems.We also supply free afterservice forever. So any doubts,
just let us know, we will
give you solutions within 30 min.
Q4: How long is the delivery time?
For the fiber laser marking machine, the delivery time will be 2-3
Q5: The payment terms?
1. T/T, 30% in advance, pay the balance before delivery.
2. Through Alibaba-AliEscrow.
4. West Union
Q6. How about the packaging
Firstly, Packed the fiber laser machine with plastic sheet for
clearing and damp proofing.
Secondly, Then put the fiber laser machine in the plywood case for
safety and clashing.
Thirdly, Transport the plywood case into the container.
1. 24hours Technical support by Email or Calling.
2. English manual and CD video for machine using and maintaining.
3. Hardware: 1 years for machine,
Software: Whole life on update for free.
4.Maintenance and technological support: Whole life.