New Water Purifier Filter Cartridge 200gpd RO Membrane Reverse
Osmosis System Water Filters For Household
Reverse osmosis (RO) It was originally pioneered in the 1700s, and
many of the techniques used today were perfected in the 1950s. RO
cleans and filters water by using a semipermeable membrane to
remove ions, molecules and large particles from water. The rate of
passage through the membrane is determined by the pressure,
concentration and temperature of the molecules or solutes on either
side. RO does not just remove salt from water, it also filters and
removes many types of dissolved and suspended species from water,
Purify varying qualities of municipal wate
Drinking water for restaurants
Drinking water vending machines
Aquarium water treatment
Softened water for homes, hotels, commercial laundries and car
Post-treatment of deionized water
Pure water for pharmaceuticals, laboratories and electronics
Hemodialysis Oil/water separatio
Innovative thin layer composite membrane design
Provides high rejection stability even with high TDS
Less fouling, Less frequency cleaning and More consistent
100% dry membrane maximizing shelf life
Lower consumption of chemical and longer life
Standard dimensions to fit in common availalbe housings
Improving the ability to clean used membranes could affect not only
water cost but also the reliability of desalination plants
Semipermeable membrane to remove ions, molecules, and larger
particles from drinking water Can remove chlorine,
fluoride,bacteria, microorganism, etc
|Stable Desalination %||96~98%||96~98%||96~98%||96~98%|
Mean Permeable Flow GDP (L/d)
|Active Film Area ft2(m2)||4(0.4)||4.2(0.42)||5.0(0.5)||5.3(0.53)|
|Test Condition||Test Pressure||65pai(0.45Mpa)|
|Test Water Temperature||25℃|
|Test Water Concentration(NaCl)||500ppm|
|Test Water PH||6.5-7.5|
|Recycle Rate %||15|
|Max Operating Temp.||300psi(2.0Mpa)|
|Max. Inlet Water Temp.||45°C|
|Max Water Inlet Silt Density Index (SDI)||5|
|Inlet Water Chlorine Tolerance||<0.1mg/l|
|Inlet Water PH Range, Continuous Operation||3~10|
|Inlet Water PH Range, Short-Term Cleaning||2~11|
|Max. Pressure Drop of Single Membrane||10psi(0.07Mpa)|
1. Q: Where is your factory, which port for transportation?
A: Our factory located in Xiamen, Welcome to vist our factory. the
port is Xiamen port.
2. Q: How can I get some samples?
A: We are glad to provide you the free sample, leave your contact
3. Q: Can you accept OEM & ODM?
A: Yes, we can accept OEM &ODM
4. Q: What is the delivery time?
A: Within 7 days after receive your payment, accordding to your
5. How to make payment?
A: We accpet T/T,Paypal.Western Union and cash face to face.
6. Q: How can I contact you?
A: Please contact us though below methods, we will reply you within