Product Introduction of the Industrial Water Chillers cooling for
130W/150W CO2 Glass Laser Tube. Our industrial laser water chillers
can keep your tube cooling at any temperaure what you need .
portable laser water chillers ,small industrial chillers ,
hydroponic water chillers ,aquarium water chillers ,peltier
chillers also be supplied .
Portable Industrial Water Chillers Cooling Systems For 130W/150W
CO2 Glass Laser Tube
1. Product Introduction of the Industrial Water Chillers cooling
for 130W/150W CO2 Glass Laser Tube .
This Industrial Water Chillers for 130W/150W CO2 Glass Laser Tube
Cooling ,0.93HP . Our LD-5200 is
refrigeration type industrial water chillers of 1800 W cooling
capacity. It's mainly used to have the heat
generated during the laser device working that gone through the
refrigerating cycle in compressor
refrigeration system and eventually transferred to the air. The
water temperature is able to be adjusted.
2. Product Specification of the Industrial Laser Water Chillers
|Power Supply||AC 110-240V ,50-60HZ|
|Compressor Power||1 HP|
|Protection||Over current protection for compressor ,flow alarm,Over temperature
|Maximum Pumping Lift||11M|
|Inlet and Outlet||External Φ10mm brass connector|
|Net Weight :||35.5KG|
|Product Dimension||60 x 33x 43 CM|
|Package Dimension||65x38x48 CM|
|Over high room temperature||Over high water temperature||Over low water temperature||Room temperature sensor failure||Water|
3. Product Feature Portable Industrial Water Chillers Cooling
Systems For CO2 Glass Laser Tube
1. Convenient for installation and operation
2. Integrated electronic control, large digital displays
3. Single temperature, single control .
4. Low flow alarm
5. Over heat and over low temperature alarm
6. One-stop automatic intelligent temperature control: in different
environment, user does not need to change setting due to it will
4. Product Details of the Industrial Water Chillers Systems For CO2
Fill the water tank with purified water. Connect the water inlet of
the water tank to the water outlet of the laser machine and connect
the water outlet of the water tank to the water inlet of the laser
machine. Connect the signal line of the water tank with that of the
laser machine. Please see pictures below.
Method of exchanging water in the water tank
Drain the waste water out of the water tank through the drain
outlet ( it can be closed and open easy ) and fill the clean the
water into the tank through the water supply inlet .
Water Temperature Control :
The industrial water chillers of LD-5200 water tank can keep the
water at a uniform temperature . its cooling function can keep the
temperature at a certain value , which can be adjusted manually .
All the parameters related to the water tank have been set as the
correct value by our company before delivery . the user may refer
to the parameter instruction manual of the water tank for detailed
description on the parameters . it is strongly suggested that the
user should not change the parameters without authorization . our
company accepts no responsibility for any insolvable problems
caused by the user's unauthorized changing of parameters .
5. Product Application of Industrial Water Chillers cooling for
130W/150W CO2 Glass Laser Tube
LD5300 Industrial water chiller for cooling Co2 laser cutting