refrigerant recovery & charging system is a suitable for a
variety of cold storage cooling equipmet, it has the advantages of
light weight, no occupation of the use of cold storage area, high
efficiency, the cold storage food rapid cooling, greatly
improving the storage of food freshness.
|Blade material:||Aluminum or stainless steel or Nylon|
|Casing material:||Stainless steel or Galvanized steel|
|Motor voltage:||According customer's requirement|
|Bearing:||NSK or SKF|
|Blade material:||Coated steel or Aluminum|
|Grille material:||Coated steel or Stainless steel|
|Advantages:||Lower noise, Large air volume,Saving room space, Energy efficiency
|Original:||Germany Ziehlabegg or China|
High Efficiency Tube
|Inside type:||Inner grooved tube|
|Advantages:||Increase inside heat exchange areas of tube and intensity of
refrigerant. At least 15% heat transfer efficiency increased|
High Strength Tube
|Material:||304 or 316L stainless steel|
|Advantages:||Running more safty, Better corrosion resistance, Good welding
·Φ16mm Copper tube or stainless steel tube.
·High efficiency sine wave fin.
·Fin material:8011, AlMg3, 304(316L), Coated.
·Fin Pitch: 4.5mm, 7mm, 10mm, 12mm.
·Other fin pitchs can be customized by user.
·Sturctures and covers of Unit Cooler are designed by our 3D
·Our advanced coil software can simulate your running heating
·We can provide CAD drawings and reliable data of your customized
Optimized Structure& Casing
·Using maintance door, checking and maintance will be easier.
·Suppport foots are consided which can provice convenience of
installing and carring.
·Normal casing material is galvanized steel ,power coated white
·Other option: Aluminum or stainless steel.
Guarantee of Safe Running
·Stainless steel Pipe running pressure to 5.0Mpa, Blasting pressure
·Nitrogen pressure 5.0Mpa which keeping 24 hours for leaking test.
|·Eddy current testing provide good quality of stainless steel tube.|
·TIG welding process of bend is fully automatic which can guarantee
high strength and good apperance.
·Float-Coil Tech. which can float tubes in the centre of plate
holes. Avoiding direct friction between tubes and plates which may
causing leakage of tubes in process of running and transport.
·Extended air throw streamer,air throw can reach to 70m
·Motor protection class IP54, Insulation grade F.
·Duct axical fan blades are made of casting aluminum
·Motor application temperature: -45℃~50℃.
·Lower noise fan is possible for special application conditions.
·Motor power will be changed with the change of air temperature and
|Rapid Defrosting System|
·Electrical defrosting- stainless steel heating pipe, installed in
fan, coil and water pan
·Water defrosting- water tray spraying
·Hot gas defrosting- hot gas pipe set in tray, energy saving and
high efficient, help oil return to compressor
·Conbine different defrosting ways together