2" - 48" Cast Steel Gate Valve Class 150 , Manual / Electric Gate Valve

Api Class 150LB Cast Steel Wedge Gate Valve with Flanged / Bw Ends Z40H

Typical Use
Gate valves are used to permit or prevent the flow of liquids, and are typically for on/off control rather than flow regulation. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry.

Quick Details:

1. Type: Gate Valves
2. OS&Y, Bolted Bonnet, Solid or Flexible Wedge Design
3. Size Range: 2" to 48"
4. Pressure Ratings: ANSI 150LB / 150#
5. Materials Available in: WCB, LCB, CF8, CF8M, CF3, CF3M, WC6, WC9, C5, C12 or Equivalent
6. Various trim materials are available to suit different service conditions
7. Actuator: Manual, Electric Actuator
8. NACE MR 0175 on request

Standards

Design and Manufacture: Cast steel gate valve to API 600 or API 6D;

Inspection and Test: API 598, API 600 or API 6D.

End flange dimension: ASME B16.5 (for NPS≤24),API 605 or ASME B16.47 series A,MSS SP-44 (for NPS > 24).

BW end dimension: ASME B16.25.

Socket-weld dimension: ASME B16.11.

Face to face and end to end: ASME B16.10.

Pressure-temperature ratings: ASME B16.34.

Features:

1. Bonnet Gasket Style

Stainless steel + flexible graphite combined gasket is used for Class 150 gate valve;

2. Packing Seal

As usual, flexible graphite is used for packing material. PTFE or combined packing material can be also used if being requosted by the customer.

3. Body and Bonnet Connection

Class 150LB gate valves are usually connected with bolted bonnet design.

4. Operation

Hand wheel or bevel gear box is usually used for gate valve operation.

5. Disc Design
NPS≥2 Gate valves are flexible wedge gate.

6. Backseat Design

All gate valves have backseat design. In most cases,the carbon steel gate valve is fitted with a renewable back seat. For stainless steel gate valve, the back seat is machined directly in the bonnet or be machined after welding.

7. Stem Design

The stem is integral forged design. The minimum diameter of the stem shall be as per the standard requirement.

8 .Stem Nut

Usually, the stem nut is made of ASTM A439 D2. It is also can be made of copper alloy or other materials if being requested by the customer.

9. Seat

For carbon steel gate valve, the seat is usually forged steel. The seat sealing surface is overlaying welded with hard alloy specified by the customer. For Stainless steel gate valve, the seat is integral with body, or it can be machined directly after hard alloy welded.

Description:

1. Cast Steel Gate Valve Parts and Material List for Class 150LB:

2. Main Connection Dimensions:

Tengs Valve - China High Quality Industrial Valve and Strainer Supplier, With More than 20 Years' Manufacturing and Exporting Experience.

Our Leading Products are Cast Steel / Forged Steel Industrial Valves and Strainers, Such as Gate Valve, Check Valve, Globe Valve, Ball Valve, Butterfly Valve, Y Type Strainer, Basket Strainer, T Type Strainer and Temporary Strainer.

All the Industrial Valves and Strainers are According to the International Standards Api, Ansi, Din, and GB etc, and the Materials Include Carbon Steel, Alloy Steel and Stainless Steel: WCB, WCC, LCB, LCC, WC6, WC9, C5, C12, CF8, CF8M, CF3, CF3M, 4A, 5A, C95800, A105, LF2, F11, SS304, SS304L, SS316, SS316L, F51 and F53 etc. Sizes Range From 1/2" to 48" (Dn15 - Dn1200), Pressure Rating From Ansi Class150LB to 2500LB (Pn10 - Pn100).

Modern Workshop, Standardized Production, We Implement Strict Quality Inspection System, In-House Inspection or Third-Party Inspection to Make Sure All the Products are Qualified Before Delivery.

Our Industrial Valve and Strainer are Widely Used in Oil, Gas, Petrochemical, Water Treatment and Energy Industries. And exported to Many Countries and Regions.

We Provide OEM & Custom-made Service, Hope to Cooperate and Provide You the Quality Products and Service.