2.4 Ghz Transmitter And Receiver Module Long Range Wireless Video Transmitter

Long-Range Wireless Video Transmitter Receiver Module

Introduction

FDM-660X is a wireless PtMP video transmitter module works at UHF band, L band and S band. It supports data rate up to 30Mbps, is a lightweight IP wireless node which suits the on-site video transmission and can be used in UAV application and emergency communications in the fields of fire protection, rescue, surveillance, police and , etc.

FDM-660X is implemented based on software defined radio architecture, and adopts self-developed waveform, efficient channel codecs and star networking protocols and other technologies to combat complex channel environments. It realizes broadband service transmission between mobile points and fixed points such as individual soldiers, vehicles and drones in complex scenarios, with small size and low power consumption.

Advantages of Video Transmitter (FDM-660X)

Advanced COFDM and MIMO RF technologies compensate for dynamic orientation issues caused by high-speed flight, pitch and roll of UAVs. Form-factor compatible models allow OEMs to easily cater for different licensed, unlicensed and special frequency band needs for international, public safety and defense customers. Self-healing, self-forming mobile mesh technology extends operating ranges and supports networks of multiple linked UAVs and UGVs – ideal for tactical MANET applications with no existing infrastructure required. Plug-and-play Ethernet and UART interfaces allow easy integration with a variety of UAS and flight controller architectures.

Specification of Video Transmitter

FAQ

1. Can we monitor the module temperature By using web UI?

• There was no function to query the temperature of the module.

2. Does this model support IP mesh?

• This model support point to multiple point. One master node can support 32 slave nodes There are three versions: 20km, 50km, and 150km according to build different the power amplifier.

  WHO WE ARE?

The original standard LTE network requires the participation and control of base stations and core networks in addition to terminals. Now each node of our star topology network devices and MESH network devices is a terminal node. These nodes are lighter and retain many advantages of the original LTE technology. For example, it has the same architecture, physical layer and subframe as LTE. It also has LTE’s other advantages such as wide coverage, high spectrum utilization, high sensitivity, high bandwidth, low latency, and dynamic power control.

Compared with normal wireless link, such as wireless bridge or other devices based on wifi standard, the LTE technology has a subframe structure, the uplink and downlink data rate is not same. This characteristic enable the wireless link products' application more flexible. Because the uplink and downlink data rate can be adjusted based on real service requirements.

In addition to the self-developed product series, IWAVE also has the ability to integrate upstream and downstream product resources in the industry. For example, based on self-developed 4G/5G industry products, IWAVE integrates wireless terminal products and industry application platforms, thereby providing terminals - base stations - core networks - End-to-end customized products and industry solutions for industry application platforms. IWAVE focuses on serving domestic and foreign industry partners, such as special industry communications fields such as park ports, energy and chemicals, public security, special operations, and emergency rescue.

HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?