DFSTN 2.4 Inch 128x64 Dot Matrix LCD Display with SPI Interface COG LCD Module for Handheld Devices

1. Display Mode: DFTN / Negative/ Transmissive
2. Display Dot Matirx: 128*64 dot
3. Viewing Direction: 6 O’Clock
4. Interface: SPI interface avaliable
5. Display Drive IC: ST7565P
6. Power Supply : 3.0V
7. Driving Scheme : 1/64Duty,1/7Bias
8. LCD Operating Temperature:-20℃ ~ +70℃
9. LCD Storage Temperature:-30℃ ~ +80℃
10. LCD Connector: COG+FPC
11. BACKLIGHT(SIDE):1pcs white LEDS, If=15mA;Vf=3.0V

DFSTN 2.4-inch LCD display with 18pin FPC SPI 128x64 COG LCD module is a common LCD display component. Here is an introduction to it:

Product parameters:

Size: The diagonal size of the screen is 2.4 inches. The specific size varies depending on the specific product.
Resolution: It has a dot matrix resolution of 128x64, capable of displaying simple graphics, text, etc.
Interface: It uses 18pin FPC (flexible printed circuit board) interface, with communication mode being SPI (serial peripheral interface). This interface has the advantages of fewer pins, simple wiring, and fast communication speed, making it convenient for connection with microcontrollers and other master control devices.
Display technology: It adopts DFSTN (double-layer super-twisted nematic) display technology, which has good contrast and viewing angle characteristics. It can clearly display the content at different angles. The display mode is usually selectable between normal display and inverted display, and the character content is clear.
Driving method: Generally, it uses COG (chip bonding) process, directly bonding the driving chip to the LCD glass, reducing the module size and improving reliability. Common driving chips include ST7567, etc.
Working voltage: The working voltage is usually 3.3V, with low power consumption, suitable for battery-powered devices.
Working temperature: It can normally work within the temperature range of -20℃ to 70℃, capable of adapting to a wide range of environmental temperatures.

Product Usage:

Instrumentation: It can be used for displaying the readings of various instruments and meters, such as multimeters, oscilloscopes, thermometers, etc., clearly showing measurement data, parameter settings, and other information.
Industrial control: On industrial control panels, it is used to display the working status, operating parameters, fault alarms, etc. of equipment, facilitating operators to monitor and control the equipment.
Handheld devices: Such as handheld terminals, walkie-talkies, blood glucose meters, etc., due to their small size and low power consumption, they can meet the requirements of handheld devices for the volume and power consumption of display components.
Smart home: It can be applied to the control panels of smart home appliances, such as smart air conditioners, smart refrigerators, etc., displaying information such as the working mode, temperature settings, and operating status of the equipment.

Packaging & Shipping:

Packaging: Carton boxess, Cupboard , EPE, Blister Tray, About the package way, it is up to the size of products,

according to customer request and demand. Different countries have not same requirement..

Shipping: Express way as DHL,Fedex,EMS,UPS,air shipping,sea shipping,Any shipping method you prefer.

Payment Method:

FAQ:

1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?

Answer: No problem. Firstly, please kindly send us your specification/ drawing paper

If you have not the specification, you can also provide your samples; we will recommend the suitable one

if it is standard products. Or we can customize for you based on your own requirement.

2.This LCD is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the outline size or display content,

a new LCD glass module is need. We have to open new tooling for you.

3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.

4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size

of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.

5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing paper confirmation and tooling charge payment,

we can report you the exact time when you confirm the drawing paper.

6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.

7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for

special ones, the leading time is about 15-30 days. suppose we can finish earlier, we will report the information in advanced.

Our Services:

1. Free repair within one year after the shipment of products from us.

2. Replacement within 30 days after the shipment of products from us due to products' problems.
3. We can print your logo and stick your model No.on the cameras.
4. We have long cooperation with many shipping companies and our export volume is large. The shipping companies

can offer us good discounts.
5. Professional technician supports. We have a good after-sales service team. They can solve your problems in time.
6.All goods will be inspected and tested by our engineers and QC/QA before packing and shipment.
7.Customers satisfactory is most important to us.If you have any problem or questions regarding our transaction.Please contact us by Email or online. It will be responded within 24 hours.

8.Products pictures only for your reference. please kindly refer to the specification. we can provide the products basic on the specification. or you can offer your own specification or drawing , we can customize all kinds of LCD displays for you. thanks for your kind support always.