| Categories | Solar Deep Well Pumps |
|---|---|
| Price: | usd 273/sets 1-9 sets |
| Brand Name: | readycome |
| Place of Origin: | China |
| MOQ: | 1 set |
| Payment Terms: | D/A,D/P,T/T |
| model number: | customized |
| place of origin: | China |
| application: | Irrigation and Agriculture |
| horsepower: | 0.4-4HP |
| power source: | Electric |
| Maximum Flow Rate: | 10L/min |
| Power Source: | Solar |
| Voltage: | 12V/24V |
| Application: | Water Supply |
| Type: | Deep Well Pump |
According to the structural form and driving mode, deep well pumps
can be divided into four product series, which are suitable for
different working conditions:
1. Vertical long shaft deep well pump (L-type)
Technical features: The motor is placed on the ground and drives
the downhole impeller through a long transmission shaft, with a
head range of 30-300m and a flow rate of 10-200m ³/h
Core advantage: Easy to maintain on the ground, suitable for clean
water sources with small amounts of sediment (≤ 100g/m ³)
Typical applications: Large scale farmland irrigation systems
(single pump can cover more than 500 acres of farmland), industrial
cooling water circulation
2. Submersible electric pump (QJ type)
Technical features: Integrated motor and pump body submerged
underwater, IP68 protection level, water resistance depth of
50-300m, supporting 220V single-phase/380V three-phase power supply
Core advantages: No transmission shaft energy loss, efficiency
improvement of 10%, noise<75dB (ground measurement)
Typical applications: household well water supply (common flow rate
5-20m ³/h, suitable for 100-150mm well diameter), decentralized
water supply in mountainous areas
3. Horizontal deep well pump (HW type)
Technical features: horizontally installed on the wellhead
platform, adopting a double suction impeller design, with a
single-stage flow rate of up to 500m ³/h and a head of 10-50m
Core advantage: Preferred for high flow and low head scenarios, can
be directly connected to horizontal water pipelines
Typical applications: Mine drainage (with a daily discharge of over
10000m ³ per pump), urban groundwater recharge projects
4. Special deep well pump
High pressure resistant type: with a pressure bearing capacity of
up to 6MPa, suitable for geothermal wells (water temperature ≤ 120
℃) and oil associated water extraction
Permanent magnet frequency conversion type: equipped with IE5 level
permanent magnet synchronous motor, frequency conversion range of
10-50Hz, energy saving rate of 30%, supporting PLC remote control
Solar deep well pump: matched with 12V/24V DC motor, equipped with
MPPT controller, with an average daily working time of 8-10 hours
(under standard lighting conditions)
| Head (H) | 10~500 m |
| Speed (n) | 1450~2900r/min |
| Efficiency (n) | 60%~85% |
| Maximum penetration depth | 50~300m |
| Medium temperature | ≤40℃,60~120C |
| Sand content | ≤50g/m³,≤1000g/m³ |
| Whole machine weight | 10~500 kg |












|